8.5 kWFujitsu High Static 8.5kW Ducted System
The 8.5 kW size of the Fujitsu High Static Ducted, typically zoned across roughly 55 to 68 square metres of conditioned area depending on layout and insulation. Runs on single phase power. We confirm duct design and sizing from your floor plan before quoting.
Part of the Fujitsu High Static Ducted range, Fujitsu General's ducted system line, in 6 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 8.5 kW options, or ask about supply and installation.
About $693 a year at the current Sydney median electricity rate: $264 of cooling plus $429 of heating, from the official GEMS test figures.
The Fujitsu High Static 8.5kW is rated 2.5 stars for both cooling and heating under the GEMS energy label for Sydney's climate zone. According to official test data, the system uses 797 kWh annually for cooling and 1296 kWh annually for heating. These are government-registered test figures that show the energy consumption you can expect under standard conditions.
The unit has a rated cooling efficiency (AEER) of 3.61 and heating efficiency (ACOP) of 4.24. The system uses R32 refrigerant. Your actual running costs will depend on local electricity rates and how often you use the air conditioner.
Source: Australian GEMS registry · median of 170 Sydney residential tariffs, including GST · Refreshed monthly · Last updated October 2026
Specifications
From the manufacturer’s published range data. We confirm the exact configuration when we quote.
About the Fujitsu High Static Ducted range| Brand | Fujitsu General |
|---|---|
| Model | ARTH30KHTA |
| Series | Fujitsu High Static Ducted |
| System type | Ducted System |
| Capacity | 8.5 kW |
