15.5 kWFujitsu High Static 15.5kW Ducted System
The 15.5 kW size of the Fujitsu High Static Ducted, typically zoned across roughly 100 to 124 square metres of conditioned area depending on layout and insulation. Available in single and three phase. We confirm duct design and sizing from your floor plan before quoting.
Part of the Fujitsu High Static Ducted range, Fujitsu General's ducted system line, in 6 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 15.5 kW options, or ask about supply and installation.
About $1,179 a year at the current Sydney median electricity rate: $450 of cooling plus $729 of heating, from the official GEMS test figures.
The Fujitsu High Static 15.5kW uses 1556 kWh annually for cooling and 2522 kWh for heating under official GEMS testing conditions for Sydney's climate zone. These figures reflect real-world operation in your local climate and form the basis of the running cost estimate shown separately on this page. The system's rated cooling efficiency (AEER) is 3.13 and heating efficiency (ACOP) is 3.68.
The unit carries a 2.5-star cooling rating and 2-star heating rating under the zoned energy labelling system for Sydney. Your actual energy consumption will depend on how often you run the system, your temperature settings, and how well your home is insulated and sealed. The exact running cost updates automatically based on current Sydney electricity rates.
Source: Australian GEMS registry · median of 170 Sydney residential tariffs · Refreshed monthly · Last updated September 2026
Specifications
From the manufacturer’s published range data. We confirm the exact configuration when we quote.
About the Fujitsu High Static Ducted range| Brand | Fujitsu General |
|---|---|
| Model | ARTH60KHTA |
| Series | Fujitsu High Static Ducted |
| System type | Ducted System |
| Capacity | 15.5 kW |
