10 kWFujitsu High Static 10kW Ducted System
The 10 kW size of the Fujitsu High Static Ducted, typically zoned across roughly 65 to 80 square metres of conditioned area depending on layout and insulation. Available in single and three phase. We confirm duct design and sizing from your floor plan before quoting.
The Fujitsu High Static 10kW uses 948 kWh per year for cooling and 1499 kWh per year for heating under official GEMS testing conditions for Sydney's climate zone. These figures form the basis of your running cost estimate, which varies with your local electricity rate. The system holds a 2.5 star energy rating for both cooling and heating under the zoned labelling scheme.
Efficiency is measured by AEER (cooling) and ACOP (heating) ratings. This system achieves an AEER of 3.24 and an ACOP of 3.99. The ducted design uses R32 refrigerant. Your actual energy consumption will depend on how often you run the system, your temperature settings, and how well your home is insulated and sealed.
Source: Australian GEMS registry · median of 150 Sydney residential tariffs · Refreshed monthly · Last updated July 2026
Specifications
From the manufacturer’s published range data. We confirm the exact configuration when we quote.
About the Fujitsu High Static Ducted range| Brand | Fujitsu General |
|---|---|
| Model | ARTH36KHTA |
| Series | Fujitsu High Static Ducted |
| System type | Ducted System |
| Capacity | 10 kW |
Other 10kW options
All ducted systems
Panasonic Multi 10kW
Model CU-5Z100VBR. One outdoor unit, Independent control
Samsung S2 Ducted 10kW
Model AC100TNHPKG / AC100TXAPKG. Whole home, SmartThings
Fujitsu Mid Static Slimline Ducted 10kW
Model ARTH36KMTAP. Whole home, Single & three phase