7.1 kWFujitsu High Static 7.1kW Ducted System
The 7.1 kW size of the Fujitsu High Static Ducted, typically zoned across roughly 46 to 57 square metres of conditioned area depending on layout and insulation. Runs on single phase power. We confirm duct design and sizing from your floor plan before quoting.
Part of the Fujitsu High Static Ducted range, Fujitsu General's ducted system line, in 6 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 7.1 kW options, or ask about supply and installation.
About $493 a year at the current Sydney median electricity rate: $185 of cooling plus $308 of heating, from the official GEMS test figures.
The Fujitsu High Static 7.1kW is rated 3 stars for cooling and 2.5 stars for heating under the government's GEMS zoned label system for Sydney. Based on official test data, it uses approximately 641 kWh annually for cooling and 1067 kWh annually for heating. These figures reflect typical usage patterns in Sydney's climate zone.
The system achieves a rated cooling efficiency (AEER) of 3.30 and a heating efficiency (ACOP) of 3.88. Running costs depend on your actual usage and current electricity rates. The R32 refrigerant used is a lower Global Warming Potential alternative to older refrigerants.
Source: Australian GEMS registry · median of 170 Sydney residential tariffs · Refreshed monthly · Last updated September 2026
Specifications
From the manufacturer’s published range data. We confirm the exact configuration when we quote.
About the Fujitsu High Static Ducted range| Brand | Fujitsu General |
|---|---|
| Model | ARTH24KHTA |
| Series | Fujitsu High Static Ducted |
| System type | Ducted System |
| Capacity | 7.1 kW |
