5 kWToshiba Digital Inverter 5kW Ducted System
The 5 kW size of the Toshiba Digital Inverter Ducted, typically zoned across roughly 32 to 40 square metres of conditioned area depending on layout and insulation. Runs on single phase power. We confirm duct design and sizing from your floor plan before quoting.
The Toshiba Digital Inverter 5kW uses 461 kWh annually for cooling and 649 kWh annually for heating under official GEMS test conditions for Sydney's climate zone. These figures represent your actual energy consumption basis for running cost calculation. The system is rated 2.5 stars for cooling efficiency and 3 stars for heating efficiency under Sydney zone standards.
The Toshiba Digital Inverter achieves an AEER of 3.44 for cooling and an ACOP of 4.23 for heating, indicating reasonable efficiency for a ducted system in this capacity class. The unit uses R32 refrigerant, a lower-GWP alternative to older refrigerants. Your running costs depend on local electricity rates applied to these verified annual energy consumption figures.
Source: Australian GEMS registry · median of 170 Sydney residential tariffs · Refreshed monthly · Last updated June 2026
Specifications
From the manufacturer’s published range data. We confirm the exact configuration when we quote.
About the Toshiba Digital Inverter Ducted range| Brand | Toshiba |
|---|---|
| Model | RAV-GM561UTP-A / RAV-GM561ATP-A |
| Series | Toshiba Digital Inverter Ducted |
| System type | Ducted System |
| Capacity | 5 kW |
