Toshiba Digital Inverter ducted indoor unit and controller

20 kW

Toshiba Digital Inverter 20kW Ducted System

Name: Toshiba Digital Inverter 20kW Ducted System
Brand: Toshiba

Model RAV-RM2241DTP-E2 / RAV-GM2241AT8-A-3-PHASE

The 20 kW size of the Toshiba Digital Inverter Ducted, typically zoned across roughly 129 to 160 square metres of conditioned area depending on layout and insulation. Three phase power required. We confirm duct design and sizing from your floor plan before quoting.

Part of the Toshiba Digital Inverter Ducted range, Toshiba's ducted system line, in 8 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 20 kW options, or ask about supply and installation.

All Toshiba Digital Inverter Ducted sizes

5kW 7.1kW 10kW 12.5kW 14kW 16kW 20kW 24kW

Not sure? Size it for me Compare this model

Supply & install pricing

Fast fixed quote by phone or email

Request a quote

1300 300 302

24/7 emergency repairs Manufacturer warranty + our workmanship warrantyPhotos & details get you a sharper price

Energy efficiencyRegistered: RAV-GM2241AT8-A/RAV-RM2241DTP-E2

2 starsCooling ratingSydney climate zone

2 starsHeating ratingSydney climate zone

2202 kWhCooling energy / yearabout $636 at the Sydney median rate

3235 kWhHeating energy / yearabout $935 at the Sydney median rate

3.18AEERACOP 3.86

What it costs to run

About $1,571 a year at the current Sydney median electricity rate: $636 of cooling plus $935 of heating, from the official GEMS test figures.

The Toshiba Digital Inverter 20kW uses 2202 kWh annually for cooling and 3235 kWh annually for heating under official GEMS testing in Sydney's climate zone. These figures represent your system's actual energy consumption and form the basis for running cost calculations against current Sydney electricity rates.

The system holds 2-star energy ratings for both cooling and heating in Sydney's zone. It achieves an AEER of 3.18 for cooling and an ACOP of 3.86 for heating. Your final running costs depend on how much you use the system and your electricity provider's rates.

Source: Australian GEMS registry · median of 170 Sydney residential tariffs · Refreshed monthly · Last updated September 2026

The details