Toshiba Digital Inverter ducted indoor unit and controller

14 kW

Toshiba Digital Inverter 14kW Ducted System

Model RAV-GM1601BTP-A / RAV-GM1601ATP-A

The 14 kW size of the Toshiba Digital Inverter Ducted, typically zoned across roughly 90 to 112 square metres of conditioned area depending on layout and insulation. Runs on single phase power. We confirm duct design and sizing from your floor plan before quoting.

Part of the Toshiba Digital Inverter Ducted range, Toshiba's ducted system line, in 7 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 14 kW options, or ask about supply and installation.

All Toshiba Digital Inverter Ducted sizes

5kW 7.1kW 10kW 12.5kW 14kW 20kW 24kW

Not sure? Size it for me Compare this model

Supply & install pricing

Fixed price in writing before work starts

Request a quote

1300 300 302

24/7 emergency repairs Manufacturer warranty + our workmanship warrantyPhotos & details get you a sharper price

Energy efficiencyRegistered: RAV-GM1601ATP-A/RAV-GM1601BTP-A

2.5 starsCooling ratingSydney climate zone

2.5 starsHeating ratingSydney climate zone

1366 kWhCooling energy / yearabout $453 at the Sydney median rate

2162 kWhHeating energy / yearabout $716 at the Sydney median rate

3.18AEERACOP 3.48

What it costs to run

About $1,169 a year at the current Sydney median electricity rate: $453 of cooling plus $716 of heating, from the official GEMS test figures.

The Toshiba Digital Inverter 14kW uses 1366 kWh annually for cooling and 2162 kWh annually for heating according to official GEMS test data for Sydney's climate zone. These figures represent energy consumption under standardised test conditions and form the basis of the system's energy label rating.

The unit holds a 2.5-star energy rating for both cooling and heating in the Sydney zone. It achieves a rated cooling efficiency (AEER) of 3.18 and heating efficiency (ACOP) of 3.48. The system uses R32 refrigerant. Your installer can calculate running costs by applying your local electricity rate to the annual energy consumption figures above.

Source: Australian GEMS registry · median of 170 Sydney residential tariffs, including GST · Refreshed monthly · Last updated October 2026

The details