Mitsubishi Heavy Industries FDUA ducted indoor and outdoor units

14 kW

MHI FDUA High Static 14kW Ducted System

Model FDUA140AVNXWVH / FDUA140VH

The 14 kW size of the MHI FDUA High Static Ducted, typically zoned across roughly 90 to 112 square metres of conditioned area depending on layout and insulation. Available in single and three phase. We confirm duct design and sizing from your floor plan before quoting.

Part of the MHI FDUA High Static Ducted range, Mitsubishi Heavy Industries's ducted system line, in 7 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 14 kW options, or ask about supply and installation.

All MHI FDUA High Static Ducted sizes

10kW 12.1kW 12.5kW 14kW 16kW 20kW 23.5kW

Not sure? Size it for me Compare this model

Supply & install pricing

Fixed price in writing before work starts

Request a quote

1300 300 302

24/7 emergency repairs Manufacturer warranty + our workmanship warrantyPhotos & details get you a sharper price

Energy efficiencyRegistered: FDCA140VNX-W/FDUA140VH

3 starsCooling ratingSydney climate zone

2.5 starsHeating ratingSydney climate zone

1228 kWhCooling energy / yearabout $407 at the Sydney median rate

2136 kWhHeating energy / yearabout $708 at the Sydney median rate

3.42AEERACOP 3.75

What it costs to run

About $1,115 a year at the current Sydney median electricity rate: $407 of cooling plus $708 of heating, from the official GEMS test figures.

The MHI FDUA High Static 14kW uses 1228 kWh annually for cooling and 2136 kWh annually for heating, based on official GEMS test data for Sydney's climate zone. These figures show the energy the system consumes under standard test conditions. The MHI FDUA High Static 14kW carries a 3-star cooling rating and 2.5-star heating rating under the zoned energy label for Sydney.

The system delivers a rated cooling efficiency (AEER) of 3.42 and heating efficiency (ACOP) of 3.75. It uses R32 refrigerant. Your actual running costs depend on how often you run the system and your local electricity rate, which is applied separately to calculate your estimated costs.

Source: Australian GEMS registry · median of 170 Sydney residential tariffs, including GST · Refreshed monthly · Last updated October 2026

The details