23.5 kWMHI FDUA High Static 23.5kW Ducted System
The 23.5 kW size of the MHI FDUA High Static Ducted, typically zoned across roughly 152 to 188 square metres of conditioned area depending on layout and insulation. Three phase power required. We confirm duct design and sizing from your floor plan before quoting.
Part of the MHI FDUA High Static Ducted range, Mitsubishi Heavy Industries's ducted system line, in 7 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 23.5 kW options, or ask about supply and installation.
About $2,001 a year at the current Sydney median electricity rate: $738 of cooling plus $1,263 of heating, from the official GEMS test figures.
The MHI FDUA High Static 23.5kW uses 2461 kWh annually for cooling and 4215 kWh annually for heating, based on official GEMS test data for Sydney's climate zone. These figures form the basis for calculating your running costs using current local electricity rates. The system carries 2-star energy ratings for both cooling and heating under the zoned labelling scheme.
Efficiency is measured by AEER (cooling) at 3.03 and ACOP (heating) at 3.61. The system uses R32 refrigerant. Your actual energy consumption will depend on how often you run the unit, your temperature settings, and how well your home is insulated and sealed.
Source: Australian GEMS registry · median of 170 Sydney residential tariffs · Refreshed monthly · Last updated August 2026
Specifications
From the manufacturer’s published range data. We confirm the exact configuration when we quote.
About the MHI FDUA High Static Ducted range| Brand | Mitsubishi Heavy Industries |
|---|---|
| Model | FDUA250AVSAWVH / FDUA250VH |
| Series | MHI FDUA High Static Ducted |
| System type | Ducted System |
| Capacity | 23.5 kW |
