Mitsubishi Heavy Industries

MHI Bronte 9.5kW Split System

Model DXK33ZRA-WF1

The 9.5kW MHI Bronte Split (model DXK33ZRA-W) is sized for very large open-plan rooms and light commercial spaces. As a guide, it cools a room of up to about 68 to 78 m². That is from Mitsubishi Heavy Industries' sizing chart for an insulated room: the larger figure if it faces north, the smaller if it faces east. Western sun, poor insulation and high ceilings bring it down. If the space is bigger, has high ceilings or strong afternoon sun, step up to the 10kW.

Part of the MHI Bronte WF1 Split range, Mitsubishi Heavy Industries's split system line, in 5 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 9.5 kW options, or ask about supply and installation.

All MHI Bronte WF1 Split sizes
Supply & install pricing
Fixed price in writing before work starts
Request a quote
24/7 emergency repairs Manufacturer warranty + our workmanship warrantyPhotos & details get you a sharper price
Energy efficiencyRegistered: DXC33ZRA-W / DXK33ZRA-WF1
3.5 starsCooling ratingSydney climate zone
2.5 starsHeating ratingSydney climate zone
773 kWhCooling energy / yearabout $256 at the Sydney median rate
1281 kWhHeating energy / yearabout $424 at the Sydney median rate
3.69AEERACOP 3.88
What it costs to run

About $680 a year at the current Sydney median electricity rate: $256 of cooling plus $424 of heating, from the official GEMS test figures.

The MHI Bronte 9.5kW uses 773 kWh annually for cooling and 1281 kWh annually for heating under standard government test conditions for Sydney's climate zone. These figures are registered with GEMS and reflect the system's performance in the zoned energy label test. The cooling mode carries a 3.5 star rating with an AEER of 3.69, while heating mode is rated at 2.5 stars with an ACOP of 3.88.

The system uses R32 refrigerant. Your actual running costs will depend on how often you operate the unit and your local electricity rate. The official test figures provide a consistent basis for comparing energy consumption across different models and sizes.

Source: Australian GEMS registry · median of 170 Sydney residential tariffs, including GST · Refreshed monthly · Last updated October 2026

The details

Specifications

From the manufacturer’s published range data. We confirm the exact configuration when we quote.

About the MHI Bronte WF1 Split range
Documentation
BrandMitsubishi Heavy Industries
ModelDXK33ZRA-WF1
SeriesMHI Bronte WF1 Split
System typeSplit System
Capacity9.5 kW
RefrigerantR32
Warranty5 year parts & labour