8.5 kWFujitsu High Static High Performance 8.5kW Ducted System
The 8.5 kW size of the Fujitsu High Static High Performance Ducted, typically zoned across roughly 55 to 68 square metres of conditioned area depending on layout and insulation. Runs on single phase power. We confirm duct design and sizing from your floor plan before quoting.
Part of the Fujitsu High Static High Performance Ducted range, Fujitsu General's ducted system line, in 4 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 8.5 kW options, or ask about supply and installation.
About $693 a year at the current Sydney median electricity rate: $264 of cooling plus $429 of heating, from the official GEMS test figures.
The Fujitsu High Static High Performance 8.5kW uses 797 kWh annually for cooling and 1296 kWh annually for heating according to official GEMS test data for Sydney's climate zone. These figures are government standard test values and show the energy required under defined conditions. The system holds a 2.5-star energy rating for both cooling and heating under the zoned label for Sydney.
The Fujitsu rates 3.61 AEER for cooling efficiency and 4.24 ACOP for heating efficiency. Your actual running cost depends on how often you operate the system and your local electricity rate, which is displayed separately on this page.
Source: Australian GEMS registry · median of 170 Sydney residential tariffs, including GST · Refreshed monthly · Last updated October 2026
Specifications
From the manufacturer’s published range data. We confirm the exact configuration when we quote.
About the Fujitsu High Static High Performance Ducted range| Brand | Fujitsu General |
|---|---|
| Model | ARTH30KHTA |
| Series | Fujitsu High Static High Performance Ducted |
| System type | Ducted System |
| Capacity | 8.5 kW |
