Mitsubishi Electric

Mitsubishi Electric MSZ-LN 6.1kW Split System

Model MSZ-LN60VG

The 6.1kW Mitsubishi Electric MSZ-LN Premium Split (model MSZ-LN60VG) is sized for large living rooms and small open-plan areas. As a guide, it cools a room of up to about 46 to 51 m². That is from Mitsubishi Heavy Industries' sizing chart for an insulated room: the larger figure if it faces north, the smaller if it faces east. Western sun, poor insulation and high ceilings bring it down. It is the largest capacity in the Mitsubishi Electric MSZ-LN Premium Split range. For a smaller, well-insulated room the 5kW will do the job for less power draw.

Part of the Mitsubishi Electric MSZ-LN Premium Split range, Mitsubishi Electric's split system line, in 4 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 6.1 kW options, or ask about supply and installation.

All Mitsubishi Electric MSZ-LN Premium Split sizes
Supply & install pricing
Fixed price in writing before work starts
Request a quote
24/7 emergency repairs Manufacturer warranty + our workmanship warrantyPhotos & details get you a sharper price
Energy efficiencyRegistered: MUZ-LN60VG2/MSZ-LN60VG3R
3 starsCooling ratingSydney climate zone
2.5 starsHeating ratingSydney climate zone
553 kWhCooling energy / yearabout $183 at the Sydney median rate
880 kWhHeating energy / yearabout $292 at the Sydney median rate
3.52AEERACOP 3.77
What it costs to run

About $475 a year at the current Sydney median electricity rate: $183 of cooling plus $292 of heating, from the official GEMS test figures.

The Mitsubishi Electric MSZ-LN 6.1kW consumes 553 kWh annually for cooling and 880 kWh for heating, based on official GEMS testing in Sydney's climate zone. These figures reflect typical use patterns and allow you to calculate running costs using current local electricity rates. The system holds a 3-star cooling rating and 2.5-star heating rating under the zoned labelling scheme for Sydney.

Efficiency is measured by AEER (cooling) at 3.52 and ACOP (heating) at 3.77. The unit uses R32 refrigerant. Your actual energy consumption will depend on your usage patterns, thermostat settings and how well your home is insulated and sealed.

Source: Australian GEMS registry · median of 170 Sydney residential tariffs, including GST · Refreshed monthly · Last updated October 2026

The details

Specifications

From the manufacturer’s published range data. We confirm the exact configuration when we quote.

About the Mitsubishi Electric MSZ-LN Premium Split range
Documentation
BrandMitsubishi Electric
ModelMSZ-LN60VG
SeriesMitsubishi Electric MSZ-LN Premium Split
System typeSplit System
Capacity6.1 kW
RefrigerantR32
Warranty5 year parts & labour