Mitsubishi Electric

Mitsubishi Electric MSZ-AP 7.1kW Split System

Model MSZ-AP71VGKD2

The 7.1kW Mitsubishi Electric MSZ-AP Split (model MSZ-AP71VGKD2) is sized for open-plan living and dining areas. As a guide it suits a typical insulated room of roughly 47 to 57m²; sun exposure and ceiling height move that band. It sits in the upper half of the Mitsubishi Electric MSZ-AP Split range. If the space is bigger, has high ceilings or strong afternoon sun, step up to the 8kW.

All Mitsubishi Electric MSZ-AP Split sizes
Supply & install pricing
Fast fixed quote by phone or email
Request a quote
24/7 emergency repairs Manufacturer warranty + our workmanship warrantyPhotos & details get you a sharper price
Energy efficiencyRegistered: MUZ-AP71VGD2/MSZ-AP71VGKD2
3 starsCooling ratingSydney climate zone
2.5 starsHeating ratingSydney climate zone
621 kWhCooling energy / yearabout $216 at the Sydney median rate
1026 kWhHeating energy / yearabout $356 at the Sydney median rate
3.53AEERACOP 3.82
What it costs to run

The Mitsubishi Electric MSZ-AP 7.1kW uses 621 kWh annually for cooling and 1026 kWh annually for heating, based on official GEMS testing for Sydney's climate zone. The system achieves a 3-star energy rating for cooling and 2.5-star rating for heating under the zoned labelling scheme. Running cost depends on your local electricity rate and usage patterns, which vary by household.

Efficiency is measured by the rated AEER of 3.53 for cooling and ACOP of 3.82 for heating. The system uses R32 refrigerant. Your actual energy consumption will depend on how often you run the air conditioner, the temperatures you set, and how well your home is insulated and sealed.

Source: Australian GEMS registry · median of 170 Sydney residential tariffs · Refreshed monthly · Last updated June 2026

The details

Specifications

From the manufacturer’s published range data. We confirm the exact configuration when we quote.

About the Mitsubishi Electric MSZ-AP Split range
Documentation
BrandMitsubishi Electric
ModelMSZ-AP71VGKD2
SeriesMitsubishi Electric MSZ-AP Split
System typeSplit System
Capacity7.1 kW
RefrigerantR32
Outdoor unitsMUZ-AP25 to MUZ-AP71 VGD2
Warranty5 year parts & labour
FAQs

Mitsubishi Electric MSZ-AP 7.1kW: your questions

How much does a 7.1kW split system cost installed?

The unit is only part of the cost. Installed price depends on whether it is a straightforward back to back installation or needs longer pipe runs, wall brackets or a condenser slab, plus any electrical work at the switchboard. We give fixed quotes by phone or email, and photos of the wall, the outdoor spot and your switchboard get you the sharpest number.

What size room does a 7.1kW air conditioner suit?

A 7.1kW split system suits roughly 46 to 57 square metres in a typical insulated room. Strong afternoon sun, high ceilings or big glass areas push you toward the next size up, and oversizing wastes money on short cycling. The capacity calculator sizes your room in under a minute, and we confirm before we quote.

How much does the Mitsubishi Electric MSZ-AP 7.1kW cost to run?

Official government test figures for Sydney's climate zone put the Mitsubishi Electric MSZ-AP 7.1kW at 621 kWh a year for cooling, which works out to about $216 a year at the current Sydney median electricity rate, and about $356 a year for heating. Your bill depends on your tariff and usage, but these are the registered figures, not estimates we made up.

Is the Mitsubishi Electric MSZ-AP 7.1kW reverse cycle?

Yes. The registered model (MSZ-AP71VGKD2) heats and cools, so one system covers Sydney summers and winters. Its official heating figures for this climate zone are shown in the energy section above.