Daikin

Daikin Zena 5kW Split System

Model FTXJ50T2VMAW / FTXJ50T2VMAK

The 5kW Daikin Zena Split System is sized for living rooms and master suites. As a guide, it cools a room of up to about 36 to 43 m². That is from Mitsubishi Heavy Industries' sizing chart for an insulated room: the larger figure if it faces north, the smaller if it faces east. Western sun, poor insulation and high ceilings bring it down. It sits in the upper half of the Daikin Zena Split System range. If the space is bigger, has high ceilings or strong afternoon sun, step up to the 6kW.

Part of the Daikin Zena Split System range, Daikin's split system line, in 4 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 5 kW options, see every 5kW split system ranked by running cost, or ask about supply and installation.

All Daikin Zena Split System sizes
Supply & install pricing
Fixed price in writing before work starts
Request a quote
24/7 emergency repairs Manufacturer warranty + our workmanship warrantyPhotos & details get you a sharper price
Energy efficiencyRegistered: RXJ50T2VMA / FTXJ50T2VMAW
3 starsCooling ratingSydney climate zone
2.5 starsHeating ratingSydney climate zone
434 kWhCooling energy / yearabout $144 at the Sydney median rate
765 kWhHeating energy / yearabout $253 at the Sydney median rate
3.77AEERACOP 4.01
What it costs to run

About $397 a year at the current Sydney median electricity rate: $144 of cooling plus $253 of heating, from the official GEMS test figures.

The Daikin Zena 5kW uses 434 kWh per year for cooling and 765 kWh per year for heating under official GEMS testing conditions for Sydney's climate zone. These figures reflect typical annual energy consumption and form the basis of running cost estimates. The system carries a 3-star cooling efficiency rating and 2.5-star heating rating under the zoned energy labelling scheme for Sydney.

Efficiency is measured by the rated AEER of 3.77 for cooling and ACOP of 4.01 for heating. The Daikin Zena 5kW uses R32 refrigerant. Your actual running costs will depend on local electricity rates and how often you operate the system.

Source: Australian GEMS registry · median of 170 Sydney residential tariffs, including GST · Refreshed monthly · Last updated October 2026

The details

Specifications

From the manufacturer’s published range data. We confirm the exact configuration when we quote.

About the Daikin Zena Split System range
BrandDaikin
ModelFTXJ50T2VMAW / FTXJ50T2VMAK
SeriesDaikin Zena Split System
System typeSplit System
Capacity5 kW
RefrigerantR32
Warranty5 year parts & labour