Daikin

Daikin FTXF 7.8kW Split System

Model FTXF80AVMA / RXF80AVMA

The 7.8kW Daikin FTXF Split System (model FTXF80AVMA) is sized for open-plan living and dining areas. As a guide, it cools a room of up to about 56 to 65 m². That is from Mitsubishi Heavy Industries' sizing chart for an insulated room: the larger figure if it faces north, the smaller if it faces east. Western sun, poor insulation and high ceilings bring it down. It is the largest capacity in the Daikin FTXF Split System range. For a smaller, well-insulated room the 7.1kW will do the job for less power draw.

Part of the Daikin FTXF Split System range, Daikin's split system line, in 8 sizes. Running costs below use the Sydney median rate; the Eastern Suburbs and Western Sydney pages cost systems on their own network tariffs. Check the size against your rooms, compare it with other 7.8 kW options, or ask about supply and installation.

All Daikin FTXF Split System sizes
Supply & install pricing
Fixed price in writing before work starts
Request a quote
24/7 emergency repairs Manufacturer warranty + our workmanship warrantyPhotos & details get you a sharper price
Energy efficiencyRegistered: RXF80AVMA / FTXF80AVMA
3 starsCooling ratingSydney climate zone
2 starsHeating ratingSydney climate zone
700 kWhCooling energy / yearabout $232 at the Sydney median rate
1278 kWhHeating energy / yearabout $423 at the Sydney median rate
3.26AEERACOP 3.73
What it costs to run

About $655 a year at the current Sydney median electricity rate: $232 of cooling plus $423 of heating, from the official GEMS test figures.

The Daikin FTXF 7.8kW uses 700 kWh per year for cooling and 1278 kWh per year for heating according to GEMS test data for Sydney's climate zone. These figures represent standard test values under defined conditions and will vary with actual usage patterns, thermostat settings and how often the system runs.

The unit carries a 3-star energy rating for cooling and 2-star rating for heating under the zoned energy label for Sydney. It has a rated cooling efficiency (AEER) of 3.26 and heating efficiency (ACOP) of 3.73. The system uses R32 refrigerant.

Source: Australian GEMS registry · median of 170 Sydney residential tariffs, including GST · Refreshed monthly · Last updated November 2026

The details

Specifications

From the manufacturer’s published range data. We confirm the exact configuration when we quote.

About the Daikin FTXF Split System range

The manufacturer’s figures in the table come from the Daikin FTXF operation manual, page 30.

Documentation
BrandDaikin
ModelFTXF80AVMA / RXF80AVMA
SeriesDaikin FTXF Split System
System typeSplit System
Capacity7.8 kW
RefrigerantR32
Warranty5 year parts & labour
Keeps heating down to-15°C outside
Keeps cooling up to50°C outside
FAQs

Daikin FTXF 7.8kW: your questions

Is the Daikin FTXF 7.8kW a new size?

Yes. Daikin added the FTXF80AVMA in 2026, when it replaced the rest of the range and renamed it from Lite to FTXF. Before that the range stopped at 7.1kW.